Directive 2004/18/EC
Section I: Contracting authority
I.1)Name, addresses and contact point(s)University of Sheffield
Procurement Office, Arts Tower, Western Bank
For the attention of: Y. Everitt
S10 2TN Sheffield
UNITED KINGDOM
Telephone: +44 1142222173
E-mail:
Internet address(es):
General address of the contracting authority: www.shef.ac.uk/procurement
Further information can be obtained from: The above mentioned contact point(s)
Specifications and additional documents (including documents for competitive dialogue and a dynamic purchasing system) can be obtained from: The above mentioned contact point(s)
Tenders or requests to participate must be sent to: The above mentioned contact point(s)
I.2)Type of the contracting authorityBody governed by public law
I.3)Main activityEducation
I.4)Contract award on behalf of other contracting authoritiesThe contracting authority is purchasing on behalf of other contracting authorities: yes
On behalf of the University of Sheffield, Aston University and Southampton University
Section II: Object of the contract
II.1)Description
II.1.1)Title attributed to the contract by the contracting authority:172/YE 2MW ESS battery storage system.
II.1.2)Type of contract and location of works, place of delivery or of performanceSupplies
Purchase
Main site or location of works, place of delivery or of performance: University of Sheffield, to be delivered and sited at Western Power Distribution"s Willenhall site.
NUTS code UKE32,UKG3
II.1.3)Information about a public contract, a framework agreement or a dynamic purchasing system (DPS)The notice involves a public contract
II.1.4)Information on framework agreement
II.1.5)Short description of the contract or purchase(s)The University of Sheffield is out to tender on behalf of the Department of Electronic and Electrical Engineering for a provision of a battery storage system as part on an innovative large scale project on grid connected energy storage systems (ESS).
The closing date for return of tenders is Thursday 28.11.2013 at 12:00 noon (UK time). Tenders must be submitted via the In-tend e-tendering system.
The technical specification can be found in the tender documentation which will be sent to you once you have expressed your interest.
II.1.6)Common procurement vocabulary (CPV)31440000, 31400000, 31410000, 31420000
II.1.7)Information about Government Procurement Agreement (GPA)The contract is covered by the Government Procurement Agreement (GPA): yes
II.1.8)LotsThis contract is divided into lots: no
II.1.9)Information about variantsVariants will be accepted: no
II.2)Quantity or scope of the contract
II.2.1)Total quantity or scope:Supply, installation and commissioning of one system.
Estimated value excluding VAT: 1 200 000 GBP
II.2.2)Information about optionsOptions: no
II.2.3)Information about renewals
II.3)Duration of the contract or time limit for completionDuration in months: 12 (from the award of the contract)
Section III: Legal, economic, financial and technical information
III.1)Conditions relating to the contract
III.1.1)Deposits and guarantees required:As per tender documents.
III.1.2)Main financing conditions and payment arrangements and/or reference to the relevant provisions governing them:As per tender documents.
III.1.3)Legal form to be taken by the group of economic operators to whom the contract is to be awarded:Joint and several liability.
III.1.4)Other particular conditionsThe performance of the contract is subject to particular conditions: no
III.2)Conditions for participation
III.2.1)Personal situation of economic operators, including requirements relating to enrolment on professional or trade registersInformation and formalities necessary for evaluating if the requirements are met: As per tender documents.
III.2.2)Economic and financial abilityInformation and formalities necessary for evaluating if the requirements are met: As per tender documents.
III.2.3)Technical capacityInformation and formalities necessary for evaluating if the requirements are met:
As per tender documents.
III.2.4)Information about reserved contracts
III.3)Conditions specific to services contracts
III.3.1)Information about a particular profession
III.3.2)Staff responsible for the execution of the service
Section IV: Procedure
IV.1)Type of procedure
IV.1.1)Type of procedureOpen
IV.1.2)Limitations on the number of operators who will be invited to tender or to participate
IV.1.3)Reduction of the number of operators during the negotiation or dialogue
IV.2)Award criteria
IV.2.1)Award criteriaThe most economically advantageous tender in terms of the criteria stated in the specifications, in the invitation to tender or to negotiate or in the descriptive document
IV.2.2)Information about electronic auctionAn electronic auction will be used: no
IV.3)Administrative information
IV.3.1)File reference number attributed by the contracting authority:172/YE
IV.3.2)Previous publication(s) concerning the same contractno
IV.3.3)Conditions for obtaining specifications and additional documents or descriptive documentTime limit for receipt of requests for documents or for accessing documents: 27.11.2013
Payable documents: no
IV.3.4)Time limit for receipt of tenders or requests to participate28.11.2013
IV.3.5)Date of dispatch of invitations to tender or to participate to selected candidates
IV.3.6)Language(s) in which tenders or requests to participate may be drawn upEnglish.
IV.3.7)Minimum time frame during which the tenderer must maintain the tenderDuration in months: 3 (from the date stated for receipt of tender)
IV.3.8)Conditions for opening of tendersDate: 28.11.2013
Persons authorised to be present at the opening of tenders: yes
Additional information about authorised persons and opening procedure: Electronic tender opening by authorised representative from Procurement Office.
Section VI: Complementary information
VI.1)Information about recurrenceThis is a recurrent procurement: no
VI.2)Information about European Union fundsThe contract is related to a project and/or programme financed by European Union funds: no
VI.3)Additional informationThis is a one stage procurement under the EU open procedure. The Invitation to Tender can be downloaded by registering and expressing your interest on the University?s e-tendering system https://in-tendhost.co.uk/Sheffield. Completed tenders must be returned through the same e-tendering system.
The closing date for return of tenders is 12:00 noon (UK time) on 28.11.2013.
VI.4)Procedures for appeal
VI.4.1)Body responsible for appeal procedures
VI.4.2)Lodging of appealsPrecise information on deadline(s) for lodging appeals: The contracting authority will incorporate a minimum 10 day standstill period at the point information on the award of contract is communicated to tenderers. This period allows unsuccessful tenderers to seek a further debriefing before the contract is entered into. If an appeal regarding the award of contract cannot be resolved, the Public Contracts Regulations 2006 (as amended) provide for aggrieved parties to take action in the High Court (England, Wales and Northern Ireland). Any such action should be brought promptly (generally within 30 days).
VI.4.3)Service from which information about the lodging of appeals may be obtained
VI.5)Date of dispatch of this notice:18.10.2013